JEE Advanced
Rotational Motion PYQJEE Advanced 2020 Paper 1 Offline
MCQ+3 / -12020
A small roller of diameter 20 cm has an axle of diameter 10 cm (see figure below on the left). It is
on a horizontal floor and a meter scale is positioned horizontally on its axle with one edge of the scale
on top of the axle (see figure on the right). The scale is now pushed slowly on the axle so that it
moves without slipping on the axle, and the roller starts rolling without slipping. After the roller has
moved 50 cm, the position of the scale will look like (figures are schematic and not drawn to scale)

on a horizontal floor and a meter scale is positioned horizontally on its axle with one edge of the scale
on top of the axle (see figure on the right). The scale is now pushed slowly on the axle so that it
moves without slipping on the axle, and the roller starts rolling without slipping. After the roller has
moved 50 cm, the position of the scale will look like (figures are schematic and not drawn to scale)

Solution
Correct option: C
Answer: C
Step 1
The roller rolls without slipping on the ground, so the speed of its centre is
where
Step 2
The scale also does not slip on the axle. Hence the speed of the scale equals the speed of the axle's top contact point:
where
Step 3
Using
Step 4
When the roller centre moves
Step 5
The scale shifts relative to the roller centre by
This matches option C.
