PracBee
Back

JEE Advanced 2016 Paper 2 Offline Physics Questions

JEE Advanced · 22 May 2016 · Answers and step-by-step solutions

Paper PDF and print

PDF and print include all subjects in this paper.

Showing 18 of 18 Physics questions · Page 1 of 1

1JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -12016Physics
An accident in a nuclear laboratory resulted in deposition of a certain amount of radioactive material of half-life 18 days inside the laboratory. Tests revealed that the radiation was 64 times more than the permissible level required for safe operation of the laboratory. What is the minimum number of days after which the laboratory can be considered safe for use?
2JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -12016Physics
The electrostatic energy of Z protons uniformly distributed throughout a spherical nucleus of radius R is given by E=35Z(Z−1)e24πε0R

The measured masses of the neutron, 11H, 715N and 815O are 1.008665u, 1.007825u, 15.000109u and 15.003065u, respectively. Given that the radii of both the 715N and 815O nuclei are same, 1 u = 931.5 MeV/c2 (c is the speed of light) and e2/(4πε0) = 1.44 MeV fm. Assuming that the difference between the binding energies of 715N and 815O is purely due to the electrostatic energy, the radius of either of the nuclei is (1 fm = 10−15 m)
3JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
Consider two identical galvanometers and two identical resistors with resistance R. If the internal resistance of the galvanometers Rc < R/2, which of the following statement(s) about anyone of the galvanometers is(are) true?
4JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
In the circuit shown below, the key is pressed at time t = 0. Which of the following statement(s) is (are) true?

JEE Advanced 2016 Paper 2 Offline Physics - Current Electricity Question 30 English
5JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
Light of wavelength λph falls on a cathode plate inside a vacuum tube as shown in the figure. The work function of the cathode surface is ϕ and the anode is a wire mesh of conducting material kept at a distance d from the cathode. A potential difference V is maintained between the electrodes. If the minimum de-Broglie wavelength of the electrons passing through the anode is λe, which of the following statement(s) is (are) true?

JEE Advanced 2016 Paper 2 Offline Physics - Dual Nature of Radiation Question 24 English
6JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
A rigid wire loop of square shape having side of length L and resistance R is moving along the X-axis with a constant velocity v0 in the plane of the paper. At t = 0, the right edge of the loop enters a region of length 3L where there is a uniform magnetic field B0 into the plane of the paper, as shown in the figure. For sufficiently large v0, the loop eventually crosses the region. Let x be the location of the right edge of the loop. Let v(x), I(x) and F(x) represent the velocity of the loop, current in the loop, and force on the loop, respectively, as a function of x. Counter-clockwise current is taken as positive.

JEE Advanced 2016 Paper 2 Offline Physics - Electromagnetic Induction Question 18 English
Which of the following schematic plot(s) is (are) correct? (Ignore gravity)
7JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -02016Physics
Consider an evacuated cylindrical chamber of height h having rigid conducting plates at the ends and an insulating curved surface as shown in the figure. A number of spherical balls made of a light weight and soft material and coated with a conducting material are placed on the bottom plate. The balls have a radius r << h. Now, a high voltage source (HV) connected across the conducting plates such that the bottom plate is at +V0 and the top plate at −V0. Due to their conducting surface, the balls will get charge, will become equipotential with the plate and are repelled by it. The balls will eventually collide with the top plate, where the coefficient of restitution can be taken to be zero due to the soft nature of the material of the balls. The electric field in the chamber can be considered to be that of a parallel plate capacitor. Assume that there are no collisions between the balls and the interaction between them is negligible. (Ignore gravity)

JEE Advanced 2016 Paper 2 Offline Physics - Electrostatics Question 40 English
The average current in the steady state registered by the ammeter in the circuit will be
8JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -02016Physics
Consider an evacuated cylindrical chamber of height h having rigid conducting plates at the ends and an insulating curved surface as shown in the figure. A number of spherical balls made of a light weight and soft material and coated with a conducting material are placed on the bottom plate. The balls have a radius r << h. Now, a high voltage source (HV) connected across the conducting plates such that the bottom plate is at +V0 and the top plate at −V0. Due to their conducting surface, the balls will get charge, will become equipotential with the plate and are repelled by it. The balls will eventually collide with the top plate, where the coefficient of restitution can be taken to be zero due to the soft nature of the material of the balls. The electric field in the chamber can be considered to be that of a parallel plate capacitor. Assume that there are no collisions between the balls and the interaction between them is negligible. (Ignore gravity)

JEE Advanced 2016 Paper 2 Offline Physics - Electrostatics Question 39 English
Which one of the following statement is correct?
9JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -12016Physics
A small object is placed 50 cm to the left of a thin convex lens of focal length 30 cm. A convex spherical mirror of radius of curvature 100 cm is placed to the right of the lens at a distance of 50 cm. The mirror is tilted such that the axis of the mirror is at an angle θ = 30∘ to the axis of the lens, as shown in the figure.

JEE Advanced 2016 Paper 2 Offline Physics - Geometrical Optics Question 57 English
If the origin of the coordinate system is taken to be at the centre of the lens, the coordinates (in cm) of the point (x, y) at which the image is formed are
10JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -12016Physics
The ends Q and R of two thin wires, PQ and RS, are soldered (joined) together. Initially each of the wires
has a length of 1 m at 10oC. Now the end P is maintained at 10oC, while the end S is heated and
maintained at 400oC. The system is thermally insulated from its surroundings. If the thermal conductivity
of wire PQ is twice that of the wire RS and the coefficient of linear thermal expansion of PQ is 1.2 × 10-5 K-1 , the change in length of the wire PQ is
11JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -12016Physics
A gas is enclosed in a cylinder with a movable frictionless piston. Its initial thermodynamic state at
pressure Pi = 105 Pa and volume Vi = 10-3 m3 changes to a final state at Pf = (132)×105Pa and
Vf = 8 × 10-3 m3 in an adiabatic quasi-static process, such that P3V5 = constant. Consider another
thermodynamic process that brings the system from the same initial state to the same final state in two
steps: an isobaric expansion at Pi followed by an isochoric (isovolumetric) process at volume Vf. The amount of heat supplied to the system in the two-step process is approximately
12JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -02016Physics
A frame of the reference that is accelerated with respect to an inertial frame of reference is called a non-inertial frame of reference. A coordinate system fixed on a circular disc rotating about a fixed axis with a constant angular velocity ω is an example of a non-inertial frame of reference. The relationship between the force F→rot experienced by a particle of mass m moving on the rotating disc and the force F→in experienced by the particle in an inertial frame of reference is,

F→rot = F→in + 2m (v→rot × ω→) + m (ω→ × r→) × ω→,

where, vrot is the velocity of the particle in the rotating frame of reference and r is the position vector of the particle with respect to the centre of the disc.

JEE Advanced 2016 Paper 2 Offline Physics - Rotational Motion Question 53 English
Now, consider a smooth slot along a diameter of a disc of radius R rotating counter-clockwise with a constant angular speed ω about its vertical axis through its centre. We assign a coordinate system with the origin at the centre of the disc, the X-axis along the slot, the Y-axis perpendicular to the slot and the Z-axis along the rotation axis (ω = ω k^). A small block of mass m is gently placed in the slot at r = (R/2)i^ at t = 0 and is constrained to move only along the slot.

The distance r of the block at time t is
13JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
Two thin circular discs of mass m and 4m, having radii of a and 2a, respectively, are rigidly fixed by a
massless, rigid rod of length l=24a through their centers. This assembly is laid on a firm and flat
surface, and set rolling without slipping on the surface so that the angular speed about the axis of the rod is ω. The angular momentum of the entire assembly about the point ‘O’ is L→ (see the figure). Which of the following statement(s) is(are) true?
JEE Advanced 2016 Paper 2 Offline Physics - Rotational Motion Question 67 English
14JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -02016Physics
A frame of the reference that is accelerated with respect to an inertial frame of reference is called a non-inertial frame of reference. A coordinate system fixed on a circular disc rotating about a fixed axis with a constant angular velocity ω is an example of a non-inertial frame of reference. The relationship between the force F→rot experienced by a particle of mass m moving on the rotating disc and the force F→in experienced by the particle in an inertial frame of reference is,

F→rot = F→in + 2m (v→rot × ω→) + m (ω→ × r→) × ω→,

where, vrot is the velocity of the particle in the rotating frame of reference and r is the position vector of the particle with respect to the centre of the disc.

JEE Advanced 2016 Paper 2 Offline Physics - Rotational Motion Question 54 English
Now, consider a smooth slot along a diameter of a disc of radius R rotating counter-clockwise with a constant angular speed ω about its vertical axis through its centre. We assign a coordinate system with the origin at the centre of the disc, the X-axis along the slot, the Y-axis perpendicular to the slot and the Z-axis along the rotation axis (ω = ω k^). A small block of mass m is gently placed in the slot at r = (R/2)i^ at t = 0 and is constrained to move only along the slot.

The net reaction of the disc on the block is
15JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
A block with mass M is connected by a massless spring with stiffness constant k to a rigid wall and moves without friction on a horizontal surface. The block oscillates with small amplitude A about an equilibrium position x0. Consider two cases:

(i) when the block is at x0; and

(ii) when the block is at x = x0 + A.

In both cases, a particle with mass m( < M) is softly placed on the block after which they stick on each other. Which of the following statement(s) is(are) true about the motion after the mass m is placed on the mass M?
16JEE Advanced 2016 Paper 2 Offline
MCQ+3 / -12016Physics
There are two Vernier calipers both of which have 1 cm divided into 10 equal divisions on the main scale.
The Vernier scale of one of the calipers (C1) has 10 equal divisions that correspond to 9 main scale
divisions. The Vernier scale of the other caliper (C2) has 10 equal divisions that correspond to 11 main
scale divisions. The readings of the two calipers are shown in the figure. The measured values (in cm) by
calipers C1 and C2 respectively, are


JEE Advanced 2016 Paper 2 Offline Physics - Units & Measurements Question 46 English
17JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
In an experiment to determine the acceleration due to gravity g, the formula used for the time period of a
periodic motion is T=2π7(R−r)5g. The values of R and r are measured to be (60 ± 1) mm and (10 ± 1)
mm, respectively. In five successive measurements, the time period is found to be 0.52 s, 0.56 s, 0.57 s,
0.54 s and 0.59 s. The least count of the watch used for the measurement of time period is 0.01 s. Which of
the following statement(s) is(are) true?
18JEE Advanced 2016 Paper 2 Offline
MCQM+4 / -22016Physics
While conducting the Young's double slit experiment, a student replaced the two slits with a large opaque plate in the XY-plane containing two small holes that act as two coherent point sources (S1, S2) emitting light of wavelength 600 mm. The student mistakenly placed the screen parallel to the XZ-plane (for z > 0) at a distance D = 3 m from the mid-point of S1S2, as shown schematically in the figure. The distance between the source d = 0.6003 mm. The origin O is at the intersection of the screen and the line joining S1S2.

JEE Advanced 2016 Paper 2 Offline Physics - Wave Optics Question 18 English
Which of the following is(are) true of the intensity pattern on the screen?

More 2016 JEE Advanced papers