MHT CET
Semiconductor Devices And Logic Gates PYQMHT CET 2025 22nd April Morning Shift
If an alternating voltage is applied across a p-n junction diode in series with a load then
Solution
Correct option: B
A pulsating voltage appears across the load.
Use Diode Action
A p-n junction diode conducts mainly when it is forward biased and blocks current when it is reverse biased.
Apply AC Input
For an alternating input, the diode conducts during the positive half-cycles only.
Check the Negative Half-Cycle
During the negative half-cycles, the diode is reverse biased, so the load voltage becomes nearly zero.
Conclusion
Thus, the output across the load is not steady DC; it appears only in pulses during the conducting half-cycles.
