PracBee

Draft for review. These notes are not listed in search yet.

Revision notes · Physics

Electrostatics

Electrostatics describes electric charges at rest and the forces they produce.

Asked 174 times, 2019-2026About 2.3 marks a paper10 min read

1Electric charge and Coulomb's law

  • Electric charge: a property causing electric attraction or repulsion.
  • Charge conservation: systems exchanging no charge keep the same total charge, including signs.
  • Charge quantisation: transferred charge consists of whole elementary-charge multiples.
  • Charges add algebraically, retaining their signs.
  • Coulomb's law: point-charge force is proportional to the charge-magnitude product and inversely proportional to squared separation.
  • Force acts along the line joining charges.
  • Point-charge sizes are negligible beside separation.
  • Permittivity: a medium's property affecting electric interactions.
  • A uniform dielectric (an electrical insulator without freely moving charges) has constant permittivity.
  • With charges and medium fixed, force–distance graphs follow inverse-square curves.

Formulas

q=±ne
q: charge (C), n: integer equal to or greater than 0 (unitless), e: elementary charge magnitude (C).
K=εε0,k=14πε0,F=14πε0|q1q2|Kr2
K: dielectric constant (medium permittivity divided by vacuum permittivity). ε, ε₀: medium, vacuum permittivities (F m⁻¹). k: Coulomb's constant (N m² C⁻²), F: force (N), q₁, q₂: charges (C), r: separation (m).
F2F1=|q1,newq2,new||q1,oldq2,old|K1K2(r1r2)2
Subscripts 1, 2: initial, final.
K1r12=K2r22
Equal forces, unchanged charges.

Interactions between charges

Charge signsInteraction
Both positiveCharges with the same sign repel
Both negativeCharges with the same sign repel
Opposite signsCharges with opposite signs attract

Note

For calculations, air has dielectric constant approximately 1. A square's diagonal differs from its side.

2Electric field, superposition and equilibrium

  • Electric field: force per unit positive test charge (a small charge used to measure a field).
  • Test charges leave sources undisturbed.
  • Superposition: resultant forces and fields are vector sums.
  • Field lines show force direction on positive test charges.
  • Field lines start on positive charges, ending on negative charges or extending to infinity.
  • Field lines cannot intersect because field direction is unique.
  • Electrostatic field lines never form closed loops.
  • Denser field lines represent stronger fields.
  • Equilibrium: zero resultant force on the specified charge.
  • Whole-system equilibrium requires zero resultant force on every charge.

Formulas

E→=F→q0,E=k|Q|r2
E: field (N C⁻¹), F: force (N), q₀: positive test charge (C), Q: source charge (C). r: distance (m), k: Coulomb's constant (N m² C⁻²). These formulas assume vacuum or air.
E→=E→1+E→2+⋯,F→=F→1+F→2+⋯
Numbered subscripts label contributions.
E=Ex2+Ey2,E=E12+E22+2E1E2cos⁡α
Eₓ, Eᵧ: perpendicular components (N C⁻¹), α: angle between the two fields (degrees or radians).
Esemicircle=|λ|2πε0r
λ: uniform linear charge density, charge per unit length (C m⁻¹), r: semicircle radius (m), ε₀: vacuum permittivity (F m⁻¹). At the centre of a uniformly charged semicircular arc in vacuum.
E→1+E→2=0⇒E1=E2,|q1|r12=|q2|r22
Fields oppose. q₁, q₂: charges (C), r₁, r₂: equilibrium-point distances (m).
Q=−q4
Q: central charge (C), q: equal positive end-charge magnitude (C). Adjacent separations are equal.

Two-charge zero-field positions

Source chargesFinite zero-field position
Equal, likeMidpoint
Unequal, likeBetween charges, nearer smaller magnitude
Unequal, unlikeOutside, beyond smaller magnitude
Equal, unlikeNo finite point

Note

Equal field magnitudes cancel only in opposite directions. A positive uniform semicircle's central field points towards its open side.

3Electric flux and Gauss's law

  • Electric flux: the sum of field components perpendicular to small surface areas, each multiplied by its area.
  • Area vectors are perpendicular to surfaces.
  • Closed surfaces use outward area vectors.
  • Outward flux is positive, inward flux negative.
  • Gaussian surface: imaginary closed surface for Gauss's law.
  • Gauss's law: total outward flux equals enclosed net charge divided by vacuum permittivity.
  • With enclosed charge and medium unchanged, total flux is independent of surface size and shape.
  • Outside charges contribute zero net closed-surface flux.
  • Electric displacement: a field whose total outward flux through a closed surface equals the enclosed free charge.

Formulas

ϕ=E→⋅A→=EAcos⁡θ,ϕ=∫E→⋅dA→
φ: flux (N m² C⁻¹), E: field (N C⁻¹), A: area (m²), θ: field–area-vector angle (degrees or radians). dA: small area (m²). The product form requires a uniform field over a flat surface.
ϕ=∮E→⋅dA→=Qenclosedε0
Q_enclosed: enclosed total charge (C), ε₀: vacuum permittivity (F m⁻¹).
ϕ=QfreeKε0,Qfree=Kε0(ϕout−ϕin)
Q_free: enclosed free charge (C), K: uniform dielectric constant (unitless). φ_out, φ_in: positive outgoing, incoming flux magnitudes (N m² C⁻¹).
ϕface=Q6ε0,ϕtwo faces=Q3ε0
Q: central cube charge (C).
D→=εE→,∮D→⋅dA→=Qfree
D: electric displacement (C m⁻²), ε: linear uniform medium's permittivity (F m⁻¹).

Note

Zero flux need not mean zero field. Electric-flux unit: V m, never Wb.

4Applications of Gauss's law

  • Spherical symmetry gives equal radial fields at equal centre distances.
  • Spherical distributions act outside like their total charge concentrated centrally.
  • Uniformly charged nonconducting solid spheres have interior fields increasing linearly with centre distance.
  • Infinite uniformly charged nonconducting sheets produce distance-independent fields.
  • Infinite uniform line-charge fields vary inversely with perpendicular distance.
  • Positive-charge fields point outward, negative-charge fields inward.

Formulas

λ=QL,σ=QA,ρ=QV
λ: linear density, charge per unit length (C m⁻¹). σ: surface density, charge per unit area (C m⁻²). ρ: volume density, charge per unit volume (C m⁻³). Q: charge (C), L: length (m), A: area (m²), 𝒱: volume (m³).
Q=4πR2σ,Q=43πR3ρ
R: sphere radius (m). Respective densities are uniform.
E=ρr3ε0 (r<R),Esurface=ρR3ε0
E: field (N C⁻¹), r: centre distance (m), ε₀: vacuum permittivity (F m⁻¹). Uniform positive volume density. These formulas assume vacuum or air.
E=Q4πε0r2=σR2ε0r2 (r>R)
Positive spherical charge. Second form: uniform surface charge.
Esheet=|σ|2ε0,Eline=|λ|2πε0r
For line charge, r: perpendicular axis distance (m).
σ1σ2=R22R12
σ₁, σ₂: respective surface densities (C m⁻²), R₁, R₂: respective radii (m). Equal sphere charges must not be zero.

Note

Infinite-sheet results neglect edges.

5Electric potential and its relation to electric field

  • Electric potential: electric potential energy per unit test charge.
  • Potential is a scalar (a quantity without direction), so contributions add with charge signs.
  • Infinity has zero potential unless stated otherwise.
  • Electric field equals the negative rate of potential change with position.
  • Potential decreases along the electric field.
  • Steeper potential–position graphs represent stronger fields.
  • Equipotential surface: equal potential everywhere.
  • Fields are perpendicular to equipotentials wherever fields are not zero.
  • Uniform fields give equally spaced parallel planes for equal potential intervals.

Formulas

V=k(q1r1+q2r2+⋯),k=14πε0
V: potential (V), qᵢ: charges (C), rᵢ: distances (m), k: Coulomb's constant (N m² C⁻²). ε₀: vacuum permittivity (F m⁻¹). These formulas assume vacuum or air.
V=k∑iqir,q1r1+q2r2=0
r: common distance (m). Second relation: zero potential.
Q=λπR,Vhalf ring=λ4ε0
Q: half-ring charge (C), λ: uniform linear density (C m⁻¹), R: radius (m). At the half-ring's centre in vacuum; λ retains its sign.
Ex=−dVdx,VB−VA=−∫ABE→⋅dr→
Eₓ: field component (V m⁻¹), x: coordinate (m), E: field (V m⁻¹). A, B: endpoints, V_A, V_B: potentials (V), dr: displacement (m).
Er=−dVdr,Qenclosed=4πε0r2Er,Qenclosed=43πr3ρ
Eᵣ: outward radial field component (V m⁻¹), Q_enclosed: enclosed charge (C), ρ: volume charge density (C m⁻³). Spherical symmetry in vacuum or air. Last relation: uniform volume density throughout the enclosed sphere.
ΔV=VB−VA=−E→⋅Δr→
ΔV: potential difference (V), Δr: endpoint displacement (m). Uniform field required.

Note

Zero potential need not mean zero field. Half-ring central potential is radius-independent only for fixed linear density.

6Electrostatic potential energy and work

  • System potential energy sums distinct pair interaction energies.
  • Reference energy is zero at infinite separations.
  • Electrostatic force is conservative: work depends only on endpoints.
  • Slow external work equals potential-energy increase.
  • Electric-field work equals potential-energy decrease.
  • Equal-potential motion requires zero net electric work.
  • Positive charges gain potential energy at higher potential with fixed sources.

Formulas

U=∑i<jkqiqjrij,k=14πε0
U: potential energy (J), qᵢ, qⱼ: charges (C), rᵢⱼ: pair separation (m). i, j: labels, k: Coulomb's constant (N m² C⁻²), ε₀: vacuum permittivity (F m⁻¹). These formulas assume vacuum or air.
ΔU=kq1q2(1rf−1ri)
ΔU: energy change (J), rᵢ, r_f: initial, final separations (m).
Wexternal=ΔU=qΔV=q(VB−VA),Wfield=−ΔU
W_external, W_field: external, electric-field work (J), q: moved charge (C). ΔV: potential difference (V), V_A, V_B: initial, final potentials (V).

Energy of an isolated charge pair

Charge productEnergy signEffect of decreasing separation
PositivePositiveEnergy increases
NegativeNegativeEnergy decreases
ZeroZeroEnergy remains zero

Note

Unchanged separation cancels only that source's energy change. Zero total energy does not require equilibrium.

7Conductors in electrostatic equilibrium

  • Conductor: a material with freely moving charges.
  • Electrostatic equilibrium: free charges have no net motion.
  • Conducting material has zero field because otherwise free charges would move.
  • Connected conducting material has uniform potential.
  • Surface fields are perpendicular because a component along the surface would move free charges.
  • Excess charge resides on an isolated conductor's outer surface when its cavity is uncharged.
  • Electrostatic shielding protects empty closed conducting cavities from external fields.
  • A Van de Graaff generator's belt transports charge to a hollow conducting sphere.
  • The generator stores outside surface charge, producing high voltage and low current.

Formulas

Einside material=0 N C−1,Ejust outside=|σ|ε0
E: field (N C⁻¹), σ: local surface density (C m⁻²), ε₀: vacuum permittivity (F m⁻¹). The outside-field formula assumes vacuum immediately outside the conductor.
Qinner=−q,Qouter=Qshell+q
q: total cavity charge (C), Q_inner, Q_outer, Q_shell: inner-surface, outer-surface, total shell charges (C).

Note

Conducting material's zero field does not extend automatically to charged cavities. The generator needs no crossed electric and magnetic fields.

8Charged spherical conductors

  • Concentric spherical shells contribute constant potentials inside each shell.
  • Coalescence (joining) of conducting drops conserves charge and liquid volume when neither is lost.
  • Connected spheres reach equal potentials, conserving total signed charge.
  • Isolated-sphere sharing neglects wire charge and mutual sphere influence.

Formulas

V=kQR (r≤R),V=kQr (r>R),k=14πε0
V: potential (V), Q: sphere charge (C), R: radius (m), r: centre distance (m). k: Coulomb's constant (N m² C⁻²), ε₀: vacuum permittivity (F m⁻¹). These formulas assume vacuum or air.
Vsurface−V(r)=kQ(1R−1r),E(r)=k|Q|r2(r>R)
E: outside field (N C⁻¹).
Q=nq,R=n1/3r0,Vbig=n2/3V0
n: identical drop count (unitless), q: individual charge (C), r₀: radius (m). V₀, V_big: individual, combined potentials (V).
Q1R1=Q2R2,Q1+Q2=Qinitial
Q₁, Q₂: final charges (C), R₁, R₂: radii (m), Q_initial: initial total charge (C).
Q1=QinitialR1R1+R2,Q2=QinitialR2R1+R2
Sphere radii remain unchanged.
σ=Q4πR2,Q1Q2=R1R2,σ1σ2=E1E2=R2R1
σ: surface density (C m⁻²), E₁, E₂: respective surface-field magnitudes (N C⁻¹). All three ratios require equal potentials that are not zero.

Note

Zero interior field allows potential that is not zero. Equal potentials give equal charges only for equal radii.

9Electric dipole

  • Electric dipole: equal opposite charges separated by a small distance.
  • Dipole moment measures charge separation's magnitude and direction.
  • Dipole moment points from negative to positive charge.
  • The axial line passes through both charges.
  • The equatorial line crosses the midpoint perpendicular to the axis.
  • Short-dipole results require centre distances much greater than full separation.

Formulas

p=q(2l)
p: dipole moment (C m), q: charge magnitude (C), 2l: full separation (m).
Ea=2kpr3,Ee=kpr3,k=14πε0(r≫2l)
Eₐ, Eₑ: axial, equatorial fields (N C⁻¹), r: centre distance (m), k: Coulomb's constant (N m² C⁻²). ε₀: vacuum permittivity (F m⁻¹). Vacuum or air.
Vequatorial=0 V
V_equatorial: potential on the equatorial line, with zero potential at infinity (V).
EaEe=2 at equal r,rare=21/3 at equal field magnitude
rₐ, rₑ: axial, equatorial distances (m).
p1x3=p2(d−x)3,xd−x=(p1p2)1/3
p₁, p₂: opposite collinear dipole moment magnitudes (C m), d: centre separation (m). x: zero-field distance from first centre (m).

Short-dipole field directions

PositionField direction
Beyond positive end, axiallyAlong dipole moment
Beyond negative end, axiallyAlong dipole moment
Equatorial lineOpposite dipole moment

Note

Two-dipole balance requires opposing axial fields at valid short-dipole distances.

10Dipoles and charged particles in a uniform electric field

  • Uniform fields have constant magnitude and direction.
  • Uniform fields exert equal opposite dipole forces, giving zero resultant force.
  • The force pair produces torque, a turning effect aligning the dipole.
  • Negative charges accelerate opposite to the field.
  • Suspension requires upward electric force balancing weight.
  • When only electric force works, its work becomes kinetic-energy change.

Formulas

τ→=p→×E→,τ=pEsin⁡θ,τmax=pE
τ: torque (N m), p: dipole moment (C m), E: field (N C⁻¹), θ: moment–field angle (degrees or radians).
U=−pEcos⁡θ,Wexternal=Uf−Ui=pE(cos⁡θi−cos⁡θf)
U: potential energy (J), W_external: external work (J), i, f: initial, final orientations. External-work relation: slow rotation with unchanged kinetic energy.
F→=qE→,a→=qE→m,|q|E=mg
F: force (N), q: charge (C), a: acceleration (m s⁻²), m: mass (kg), g: gravitational acceleration (m s⁻²). Acceleration relation: when electric force is the only resultant force. Last relation: suspension.
E=|ΔV|d,v2=2|q|ELm,|q|m=v22EL
ΔV: plate potential difference (V), d: plate separation (m), v: final speed (m s⁻¹). L: distance along accelerating force (m).
12mv2=|q|Vacc,v1v2=|q1|m2|q2|m1
V_acc: accelerating voltage (V). Subscripts label particles starting from rest through equal voltage.

Dipole orientations in a uniform field

AngleTorque magnitudePotential energyCondition
0∘Zero−pEStable equilibrium: returns after a small turn
90∘pEZeroMaximum torque
180∘Zero+pEUnstable equilibrium: turns farther after a small turn

Note

Speed formulas assume rest initially and negligible losses. Torque uses sine, energy cosine.

11Dielectrics and polarisation

  • Polarisation: molecular charge separation or partial alignment under electric fields.
  • Polarisation vector: total molecular dipole moment per unit volume.
  • Polar molecules have separated positive and negative charge centres.
  • Molecular polarity follows the vector sum of bond dipole moments.
  • Random orientations give zero average moment in unpolarised polar dielectrics.
  • Applied fields partly align permanent molecular dipoles.
  • Polarisation produces bound charges, restricted to the dielectric.
  • With free source charge fixed, opposing polarisation fields reduce resultant fields.

Formulas

P→=∑p→V
P: polarisation (C m⁻²), p: molecular dipole moment (C m), 𝒱: small averaging volume (m³).
E=E0K
E, E₀: dielectric, vacuum fields (V m⁻¹), K: dielectric constant (unitless). Fixed free charge, uniform dielectric.

Polar and nonpolar molecules

PropertyPolarNonpolar
Charge centres without fieldSeparatedCoincident
Permanent net dipole momentPresentZero
Response to applied fieldPermanent dipoles partly alignCharge centres shift
ExamplesH₂O, HClN₂, O₂

Note

Shape alone cannot establish polarity. Bond moments can cancel.

12Units and dimensions

  • Mass, length, time and electric current are base quantities for dimensional formulas.
  • M, L, T and A represent these base dimensions.

Formula

1 μC=10−6 C,1 cm=10−2 m,1 mm=10−3 m,1 μm=10−6 m
μ: micro prefix, C: coulomb, m: metre, cm: centimetre, mm: millimetre.

Electrostatic quantities

QuantitySymbolSI unitDimensions
Chargeq,QC[AT]
Electric fieldEN C⁻¹ or V m⁻¹[MLT−3A−1]
PotentialVV[ML2T−3A−1]
Potential energy or workU,WJ[ML2T−2]
Electric fluxϕN m² C⁻¹ or V m[ML3T−3A−1]
Permittivityε0,εF m⁻¹[M−1L−3T4A2]
Dipole momentpC m[LTA]
Polarisation or surface densityP,σC m⁻²[L−2TA]
Linear charge densityλC m⁻¹[L−1TA]
Volume charge densityρC m⁻³[L−3TA]

Note

Dielectric constant is unitless. Torque uses N m, energy J, despite identical dimensions.

How MHT CET asks this chapter

Every repeated question type, most asked first. The bar shows how often, out of 174 past questions.

Electric flux and Gauss's law

Asked 19 times

Recognise: Flux, enclosed charge, ‘number of lines of force’, or flux through cube faces or cylinder ends is asked.

Method: Use Qfree/(Kε0) for flux, including ‘number of lines of force’. Subtract incoming from outgoing flux. Use symmetry or subtract known contributions for partial flux.

Past question · MHT CET 2026 11th April Evening Shift

Potential energy of a system of charges

Asked 16 times

Recognise: Charge arrangements have specified energy, zero energy, or energy changes after motion.

Method: Add signed pair energies once, using actual separations. Set the sum to zero or subtract initial from final energy.

Past question · MHT CET 2026 17th April Evening Shift

Coulomb's law

Asked 13 times

Recognise: Charges, separation or medium change, and force or equivalent separation is asked.

Method: Find new signed charges. Divide Coulomb's laws, cancel unchanged quantities, and square the distance ratio.

Past question · MHT CET 2026 20th April Morning Shift

Superposition of electric forces and fields

Asked 13 times

Recognise: Questions ask resultant forces or fields, compare axial and equatorial dipole fields, or test whether field and potential vanish.

Method: Find directions and magnitudes. Cancel opposite contributions, then add components. Identical touching spheres conserve charge and share equally.

Past question · MHT CET 2025 25th April Evening Shift

Electric potential due to charges

Asked 13 times

Recognise: Potential is asked at centres, midpoints, arc centres or cancellation points.

Method: Add signed kq/r using source distances. Arc charge: linear density times length. Respect the specified region.

Past question · MHT CET 2026 20th April Morning Shift

Equilibrium of electric charges

Asked 12 times

Recognise: Charge or dipole arrangements require zero force or field.

Method: Equate opposing field magnitudes. Point charges use squared distances, short dipoles cubed distances. Check every charge for whole-system equilibrium.

Past question · MHT CET 2026 17th April Evening Shift

Electric dipole in a uniform electric field

Asked 11 times

Recognise: A dipole in a uniform field has net force, torque, charge, length, rotational work or minimum-energy orientation asked.

Method: Find moment using full separation. Torque uses sine, energy cosine. External work equals final minus initial energy.

Past question · MHT CET 2026 18th April Morning Shift

Potential difference and work

Asked 10 times

Recognise: Charges move between stated potentials or along equipotential surfaces.

Method: Multiply final minus initial potential by signed charge. Reverse sign for field work. Equal potentials give zero work.

Past question · MHT CET 2026 20th April Evening Shift

Potential of a charged spherical conductor

Asked 10 times

Recognise: Conducting drops merge, or sphere potential and field are asked.

Method: Use radius for interior potential, centre distance outside. Merging drops conserve charge and volume. Eliminate kQ using potential differences.

Past question · MHT CET 2026 19th April Morning Shift

Charged particle in an electric field

Asked 9 times

Recognise: Charged particles accelerate, gain speed through voltage, or remain suspended.

Method: Use electric force and Newton's second law. Balance weight for suspension. Electric work equals kinetic-energy gain.

Past question · MHT CET 2024 11th May Morning Shift

Electric field using Gauss's law

Asked 8 times

Recognise: Sphere or large plane-sheet charge densities and dimensions are given.

Method: Match density to area or volume. Use spherical Gaussian or infinite-sheet fields. Measure sphere distances from the centre.

Past question · MHT CET 2026 16th April Evening Shift

Conductors in electrostatic equilibrium

Asked 8 times

Recognise: Statements concern conductor fields, induced shell charges, field lines or a Van de Graaff generator.

Method: Use conductor field rules, charge conservation and Gauss's law between concentric conductors. For generators, recall belt transport, outside charge, high voltage, low current and no crossed fields.

Past question · MHT CET 2025 23rd April Morning Shift

Relation between electric field and potential

Asked 6 times

Recognise: Potential or field is given as a position function, graph or uniform-field arrangement.

Method: Take the negative potential slope for field or the negative field integral for potential difference. Use Gauss's law afterward if density is required.

Past question · MHT CET 2025 19th April Evening Shift

Charge distribution on connected conducting spheres

Asked 6 times

Recognise: Spheres touch, share wires, or have equal potentials, with final charges or densities asked.

Method: Conserve signed total charge and equate charge divided by radius. Density equals final charge divided by sphere area.

Past question · MHT CET 2026 11th April Morning Shift

Polarisation of dielectrics

Asked 6 times

Recognise: Molecular polarity statements or dielectric effects on fields are asked.

Method: Add molecular moments as vectors. Check permanent charge separation. With free source charge fixed, divide vacuum field by dielectric constant.

Past question · MHT CET 2026 17th April Morning Shift

Key points to remember

  1. 1Coulomb force follows charge product divided by dielectric constant and squared separation.
  2. 2Forces and fields add as vectors, potentials as signed scalars.
  3. 3Closed-surface flux depends on enclosed net charge, not surface size.
  4. 4Zero potential does not imply zero field.
  5. 5Slow external work equals potential-energy increase. Field work has opposite sign.
  6. 6Conducting material has zero field, possibly potential that is not zero.
  7. 7Dipole moment uses full separation, pointing from negative to positive.
  8. 8Dielectrics reduce field by dielectric constant with free source charge fixed.

Constants and data

Permittivity of free spaceε₀8.85 × 10⁻¹² F m⁻¹
Coulomb's constantk9.00 × 10⁹ N m² C⁻²
Elementary charge magnitudee1.60 × 10⁻¹⁹ C
Electron massmₑ9.11 × 10⁻³¹ kg
Gravitational accelerationg9.80 m s⁻²

Connections to other chapters

  • Needs: Motion in a Plane — vectors and constant acceleration.
  • Needs: Laws of Motion — force balance and acceleration.
  • Needs: Work, Energy and Power — work and kinetic energy.
  • Used in: Current Electricity — potential difference and charge flow.

This chapter

Electrostatics

LessonsChapter test