JEE Advanced
Heat And Thermodynamics PYQJEE Advanced 2023 Paper 2 Online
INTEGER+3 / -02023
A cylindrical furnace has height and diameter both . It is maintained at temperature . The air gets heated inside the furnace at constant pressure and its temperature becomes . The hot air with density rises up a vertical chimney of diameter and height above the furnace and exits the chimney (see the figure). As a result, atmospheric air of density , pressure and temperature enters the furnace. Assume air as an ideal gas, neglect the variations in and inside the chimney and the furnace. Also ignore the viscous effects.
[Given: The acceleration due to gravity and ]

[Given: The acceleration due to gravity

When the chimney is closed using a cap at the top, a pressure difference develops between the top and the bottom surfaces of the cap. If the changes in the temperature and density of the hot air, due to the stoppage of air flow, are negligible then the value of is __________ .
Solution
Answer: 30
The pressure difference is
Use the density-temperature relation
For air at the same pressure,
Thus, for outside air and hot air,
Find the density of hot air
Substitute the given values:
So,
Write pressures at the two cap surfaces
After the chimney is closed, pressure at the lower surface is
Pressure at the upper surface is
Calculate the pressure difference
The required difference is
Hence,
