JEE Advanced
Properties Of Matter PYQJEE Advanced 2020 Paper 1 Offline
INTEGER+4 / -02020
When water is filled carefully in a glass, one can fill it to a height h above the rim of the glass due to
the surface tension of water. To calculate h just before water starts flowing, model the shape of the
water above the rim as a disc of thickness h having semicircular edges, as shown schematically in the
figure. When the pressure of water at the bottom of this disc exceeds what can be withstood due to
the surface tension, the water surface breaks near the rim and water starts flowing from there. If the
density of water, its surface tension and the acceleration
due to gravity are 103 kg m−3
, 0.07 Nm−1
and 10 ms−2
, respectively, the value of h (in mm) is _________.

the surface tension of water. To calculate h just before water starts flowing, model the shape of the
water above the rim as a disc of thickness h having semicircular edges, as shown schematically in the
figure. When the pressure of water at the bottom of this disc exceeds what can be withstood due to
the surface tension, the water surface breaks near the rim and water starts flowing from there. If the
density of water, its surface tension and the acceleration
due to gravity are 103 kg m−3
, 0.07 Nm−1
and 10 ms−2
, respectively, the value of h (in mm) is _________.

Solution
Answer: 3.74
Relate Pressure to Surface Tension
Just before overflow, the hydrostatic pressure at the bottom of the raised water disc is balanced by the pressure due to surface tension:
Use the Curvature Approximation
The disc radius is much larger than the semicircular edge radius, so
For the semicircular edge,
Simplify the Balance
Substitute the effective curvature:
So,
Calculate Height
Using
