JEE Advanced
Heat And Thermodynamics PYQJEE Advanced 2016 Paper 1 Offline
MCQ+3 / -12016
A water cooler of storage capacity 120 litres can cool water at a constant rate of P watts. In a closed circulation system (as shown schematically in the figure), the water from the cooler is used to cool an external device that generates constantly 3 kW of heat (thermal load).
The temperature of water fed into the device cannot exceed 30°C and the entire stored 120 litres of water is initially cooled to 10°C. The entire system is thermally insulated. The minimum value of P (in watts) for which the device can be operated for 3 hours is :

(Specific heat of water is 4.2 kJ kg−1 K−1 and the density of water is 1000 kg m−3)
The temperature of water fed into the device cannot exceed 30°C and the entire stored 120 litres of water is initially cooled to 10°C. The entire system is thermally insulated. The minimum value of P (in watts) for which the device can be operated for 3 hours is :

(Specific heat of water is 4.2 kJ kg−1 K−1 and the density of water is 1000 kg m−3)
Solution
Correct option: B
Answer: B.
Calculate heat produced by the device
The device produces
Find heat stored by water
The water mass is
Heat to be removed by cooler
The cooler must remove the remaining heat:
Compute minimum power
For
Thus, the correct option is B.
