JEE Advanced
Units And Measurements PYQIIT-JEE 2012 Paper 1 Offline
MCQ+4 / -12012
In the determination of Young's modulus
by using Searle's method, a wire of length L = 2 m
and diameter d = 0.5 mm is used. For a load M = 2.5 kg, an extension l = 0.25 mm in the length of the wire
is observed. Quantities d and l are measured using a screw gauge and a micrometer, respectively. They
have the same pitch of 0.5 mm. The number of divisions on their circular scale is 100. The contributions to
the maximum probable error of the Y measurement
by using Searle's method, a wire of length L = 2 m
and diameter d = 0.5 mm is used. For a load M = 2.5 kg, an extension l = 0.25 mm in the length of the wire
is observed. Quantities d and l are measured using a screw gauge and a micrometer, respectively. They
have the same pitch of 0.5 mm. The number of divisions on their circular scale is 100. The contributions to
the maximum probable error of the Y measurement
Solution
Correct option: A
The error contributions from measuring
Step 1
For Searle's method,
So the measured quantities affecting the error here are
Step 2
Both instruments have pitch
Thus,
Step 3
The fractional error in extension is
The fractional error in diameter is
Step 4
Since
Now,
Hence, both contributions are the same.
